 1.NJP Series Closed Full Auto.Capsule
Filling Machine |
|
| Product Information: |
Features: 1) Good-looking
appearance, exquisite workmanship, ease of operation, simplicity of use.
2) Stowage seat and measuring plate are designed as one unit to make measuring
plate and stowage rod without deviation phenomenon, avoid friction phenomenon
between stowage rod and measuring plate, improve its precision highly, furthermore,
it delays the machine's life greatly.
3) Ineligible capsule can be eliminated
automatically(qualified rate not included), the medicine in the capsule can be
recycled and be reused, thus it can increase greatly heconomic efficiency.
4) Simplicity and convenience of dismantling , installation and clean, various
models of mould can be replaced each other, the mould of 800 model and 1000model
as well as 1200 model can be replaced mutually on the same machine to meet different
requirement of capacity.
5) Dust collector and vacuum pipe as well as waste
air pipe are installed in the inner of the machine , avoid the air pipe becoming
hard, broken and leakage etc phenomenon, it is more convenient to clean the platform.
Furthermore, it accords GMP the requirement that medicine can not contact with
organic material.
6) The cap of stowage rod is made of stainless steel to
replace original plastic cap to void breaking phenomenon; in the other hand, the
screws and caps on the platform lesser to make the whole appearance more good-looking. Main
technical parameters:
| Model | NJP800
| NJP1000 | NJP1200 |
| capacity (capsules/min) | 800 | 1000 | 1200 |
| NO.of die holes | 6
| 8 | 9 |
| capsule size | NO.
00-5 | | filling precision | >98% |
| dosing precision | Better
than the stipulation of State Pharmacopoeia | | power | 380V
50Hz three-phase with four wires | | power | 3kw |
| noise | <80dB(A) |
| vacuum | 0.04-0.06Mpa |
| air pressure | 75m3/h
0.4Mpa | | suction | 700m2/h
2x105pa | | overall
dimension | 970x820x1900mm(LxWxH) |
| net weight | 900kg |
|
